Muffler: Service and Repair

Muffler








REMOVAL

CAUTION: Be careful not to burn yourself, because the exhaust pipe becomes extremely hot after running.

1) Set the vehicle on a lift.
2) Lift up the vehicle.
3) Separate the muffler from rear exhaust pipe.








4) Apply a coat of spray type lubricant to the mating area of cushion rubber.
5) Remove the front and rear cushion rubber, and then remove the muffler.

CAUTION: Be careful not to drop the muffler during removal.








INSTALLATION
Install in the reverse order of removal.

NOTE:
^ Use a new gasket and self-locking nut.
^ After assembling, degrease the lubricant which was applied to the cushion rubber while removing/ installing.








INSPECTION
1) Check the connections and welds for exhaust leaks.
2) Make sure there are no holes or rusting.
3) Check the cushion rubber for wear or crack.