Removal and Replacement

Generator

REMOVAL
1. Disconnect the ground cable from the battery.






2. Disconnect the connector and terminal from generator.






3. Remove the V-belt covers.






4. Remove the front side belts.
5. Remove the bolts which install the generator onto bracket.






INSTALLATION
Install in the reverse order of removal.

Tightening torque: 25 N.m (2.5 kgf.m, 18.4 ft.lb)

CAUTION: Check and adjust the front side belt tension.






Tightening torque: 13 N.m (1.3 kgf.m, 9.6 ft.lb)