Rear Quarter Trim

REAR QUARTER TRIM

REMOVAL

1. WAGON MODEL

1. Remove the rear seat.
2. Remove the seat belt lower anchor bolt.






3. Remove cap (A) on the upper side of the rear quarter trim, and remove the bolt inside.
4. Remove side belt cover (B).
5. Remove rear belt cover (C), and remove the anchor bolt inside.






6. Remove the clips and screws, and remove the rear quarter upper trim.






7. Remove the luggage floor end cover.






8. Remove the bolts, and remove the rear quarter lower trim.






2. SEDAN MODEL

1. Remove the rear seat.
2. Remove the inside scuff plate.
3. Peel the trim, and use a screwdriver, etc. to press claw (A) of the metal clip, to remove the quarter upper trim.

CAUTION: If the metal clip comes off or becomes damaged, replace both the quarter upper trim rear and metal clips.

4. Remove the seat belt lower anchor bolt.

5. Remove cap (A) on the upper side of the rear quarter trim, and remove the bolt inside.
6. Remove belt anchor cover (B), and remove the anchor bolt inside.

7. Remove the bolts and clips, and remove the quarter upper trim front.

8. Remove the rear seat.
9. Remove the clip of the trunk room side trim.
10. Remove the clips, then remove the quarter lower trim.

INSTALLATION

Install in the reverse order of removal.