Extension Case Oil Seal
Extension Case Oil SealREPLACEMENT
1) Clean the transmission exterior.
2) Drain the ATF completely.
NOTE: Tighten the drain plug (ATF) after draining the ATF.
Tightening torque: 25 N-m (2.5 kgf-m, 18.4 ft-lb)
3) Remove the rear exhaust pipe and muffler.
^ Non-turbo model
^ Turbo model
4) Remove the propeller shaft.
5) Using the ST, remove the oil seal.
ST 398527700 PULLER ASSY
6) Using the ST, install the oil seal.
ST 498057300 INSTALLER
7) Install the propeller shaft.
8) Install the rear exhaust pipe and muffler.
^ Non-turbo model
^ Turbo model
9) Pour in ATF.
10) Bleed the air of control valve.
11) Check the level and leaks of the ATF.