Oil Charge Pipe
Oil Charge PipeREMOVAL
1) Remove the air intake chamber. (Non-turbo model)
2) Remove the intercooler. (Turbo model)
3) Remove the oil charge pipe, then remove the O-ring from the flange side.
INSTALLATION
1) Install the oil charger pipe with a new O-ring.
NOTE: Use a new bolt.
Tightening torque: 38 N-m (3.9 kgf-m, 28.0 ft-lb)
2) Install the air intake chamber. (Non-turbo model)
3) Install the intercooler. (Turbo model)
INSPECTION
Make sure the oil charge pipe is not deformed or damaged.