Rear Quarter Trim

REAR QUARTER TRIM

REMOVAL

1. SEDAN MODEL

1. Remove the rear seat.
2. Remove the side sill rear cover.
3. Remove the rear pillar lower cover (A).
4. Remove the seat belt lower anchor bolt, and then remove the rear pillar upper trim (B).

2. WAGON MODEL

1. Remove the rear seat.
2. Remove the side sill rear cover.
3. Remove the rear rail trim (A).
4. Loosen the screws and clips to remove the rear quarter upper trim (B).
5. Remove the rear skirt trim (C).
6. Remove the bolts and clips to remove the rear quarter lower trim (D).

7. Remove the nut, and remove the luggage compartment side rail.

INSTALLATION

Install in the reverse order of removal.

CAUTION: Be sure to securely hook the pawls of inner trim panel to body flange.

NOTE: When installing the rear quarter upper trim, be sure to set the rear molding as shown in the figure.