Rear Exhaust Pipe

Rear Exhaust Pipe








REMOVAL
1. Separate the rear exhaust pipe from center exhaust pipe.





2. Separate the rear exhaust pipe from muffler.

CAUTION: Be careful not to pull down the rear exhaust pipe.





3. Apply a coat of spray type lubricant to the mating area of cushion rubber.
4. Remove the rear exhaust pipe bracket from cushion rubber.





INSTALLATION
1. Apply a coat of spray type lubricant to the mating area of cushion rubber.
2. Install the rear exhaust pipe bracket to cushion rubber.





3. Install the rear exhaust pipe to muffler.

NOTE: Use a new gasket and self-locking nut.

Tightening torque: 48 Nm (4.9 kgf-m, 35.4 ft. lbs.)





4. Install the rear exhaust pipe to center exhaust pipe.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)





INSPECTION
1. Check the connections and welds for exhaust leaks.
2. Check for hole or rust.
3. Check the cushion rubber for wear or crack.