With Manufacturer's Scan Tool

Read Diagnostic Trouble Code (DTC)

OPERATION

SUBARU SELECT MONITOR (NORMAL MODE)

1. On the "Main Menu" display screen, select {Each System Check} and press the [YES] key.
2. On the "System Selection Menu" display screen, select {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type has been displayed.
4. On the "Engine Diagnosis" screen, select {DTC Display}, and then press the [YES] key.
5. On the "Diagnostic Code(s) Display" screen, select {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.

NOTE:
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Diagnostic Trouble Code Descriptions

SUBARU SELECT MONITOR (OBD MODE)

1. On the "Main Menu" display screen, select {Each System Check} and press the [YES] key.
2. On the "System Selection Menu" display screen, select {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type has been displayed.
4. On the "Engine Diagnosis" display screen, select {OBD System} and press the [YES] key.
5. On the "OBD Menu" display screen, select {Diagnostic Code(s) Display} and press the [YES] key.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Diagnostic Trouble Code Descriptions