Rear Exhaust Pipe
Rear Exhaust PipeFRONT EXHAUST PIPE:
CENTER AND REAR EXHAUST PIPE, AND MUFFLER:
REMOVAL
1. Disconnect the ground cable from battery.
2. Lift-up the vehicle.
3. Separate the rear exhaust pipe from center exhaust pipe.
CAUTION: Be careful, exhaust pipe is hot.
4. Separate the rear exhaust pipe from muffler.
CAUTION: Be careful not to pull down the rear exhaust pipe.
5. Separate and remove the rear exhaust pipe bracket from cushion rubber.
INSTALLATION
NOTE: Replace with a new gasket and nut.
1. Install the rear exhaust pipe to cushion rubber.
2. Install the rear exhaust pipe to muffler.
Tightening torque: 48 Nm (4.9 kgf-m, 35.4 ft. lbs.)
3. Install the rear exhaust pipe to center exhaust pipe.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
4. Lower the vehicle.
5. Connect the ground cable to battery.
INSPECTION
1. Check the connections and welds for exhaust leaks.
2. Make sure there are no holes or rusting.
3. Check the cushion rubber for wear or crack.