Fog/Driving Lamp: Adjustments

ADJUSTMENT

Fog light aiming

NOTE: Before checking the fog light beam level, be sure of the following:
- Check the area around the fog light for any scratches, damage or other type of deformation.
- Make sure that the vehicle is parked on a level surface.
- Make sure that the inflation pressure of tires are correct.
- Check that the vehicle fuel tank is full.

1. Bounce the vehicle several times to normalize the suspension.
2. Make certain that someone is seated in the driver s seat.
3. Measure the height of the center of fog light.
4. Disengage the three clips, and then turn over the mud guard.







5. Insert a Phillips driver into the adjustment hole and adjust the front fog light pattern.