Fuel Door: Service and Repair

FUEL FILLER FLAP LID OPENER

REMOVAL
1. Remove the second row seats.
2. Remove the third-row seats.
3. Remove the following side trims.
- Front door scuff plate LH
- Rear door scuff plate LH
- Center pillar lower trim
4. Remove the right rear quarter trim.
5. Turn over the floor mat to remove the clips securing the cable.
6. Remove the cover.




7. Remove the bolt and nut, and then detach the pull handle assembly.
8. Remove the cable from pull handle assembly.




9. Rotate the fuel lock inside the quarter panel to 90 degrees and remove. (Either right or left turn)

INSTALLATION
Install in the reverse order of removal.