Muffler: Service and Repair
MufflerCOMPONENT (part 1):
COMPONENT (part 2):
REMOVAL
1. Separate the muffler from rear exhaust pipe.
^ LH side
^ RH side
2. Apply a coat of spray type lubricant to the mating area of cushion rubber.
^ LH side
^ RH side
3. Remove the front and rear cushion rubbers, and then remove the muffler.
INSTALLATION
Install in the reverse order of removal.
NOTE: Use a new gasket and self-locking nut.
^ LH side
^ RH side
INSPECTION
1. Check the connections and welds for exhaust leaks.
2. Make sure there are no holes or rusting.
3. Check the cushion rubber for wear or crack.