Muffler: Service and Repair
MufflerComponent (Part 1):
Component (Part 2):
REMOVAL
1. Separate the muffler from rear exhaust pipe.
CAUTION:
Be careful, exhaust pipe is hot.
^ LH side
^ RH side
2. Apply a coat of spray type lubricant to the mating area of cushion rubber.
^ LH side
^ RH side
3. Remove the front and rear cushion rubber, and then remove the muffler.
INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket and self-locking nut.
Tightening torque: 48 Nm (2.5 kgf-m, 35.4 ft. lbs.)
^ LH side
^ RH side
INSPECTION
1. Check the connections and welds for exhaust leaks.
2. Make sure there are no holes or rusting.
3. Check the cushion rubber for wear or crack.