Timing Cover: Service and Repair
REMOVAL1. Remove the V-belts.
2. Remove the crank pulley.
3. Remove the timing belt cover (LH) (A).
4. Remove the timing belt cover (RH) (B).
5. Remove the front timing belt cover (C).
INSTALLATION
1. Install the front timing belt cover (C).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
2. Install the timing belt cover (RH) (B).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
3. Install the timing belt cover (LH) (A).
4. Install the crank pulley.
5. Install the V-belts.
INSPECTION
Check the cover for damage.