U5/Low Emissions Models

Read Diagnostic Trouble Code (DTC)

OPERATION

SUBARU SELECT MONITOR (NORMAL MODE)
1. On the Main Menu display screen, select the {Each System Check} and press the [YES] key.
2. On the System Selection Menu display screen, select the {Engine} and press the [YES] key.
3. Press the [YES] key after the information of engine type has been displayed.
4. On the Engine Diagnosis screen, select the {DTC Display}, and then press the [YES] key.
5. On the Diagnostic Code(s) Display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.

NOTE:
- For detailed operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Basic Descriptions

SUBARU SELECT MONITOR (OBD MODE)
1. On the Main Menu display screen, select the {Each System Check} and press the [YES] key.
2. On the System Selection Menu display screen, select the {Engine} and press the [YES] key.
3. Press the [YES] key after the information of engine type has been displayed.
4. On the Engine Diagnosis display screen, select the {OBD System} and press the [YES] key.
5. On the OBD Menu display screen, select the {DTC Display} and press the [YES] key.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Basic Descriptions