P2009

DTC P2009 INTAKE MANIFOLD RUNNER CONTROL CIRCUIT LOW (BANK 1)

1. OUTLINE OF DIAGNOSIS
Detect the open or short circuit of tumble generator valve motor.
Judge NG when the overcurrent signal is sent from IC after tumble generator valve driving IC diagnosis.




2. COMPONENT DESCRIPTION




3. ENABLE CONDITION

4. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.




5. DIAGNOSTIC METHOD
Judge NG when the malfunction criteria are completed by tumble generator valve driving IC, and then NG signal is sent to main IC. At the main IC, judge NG when the NG signal is sent continuously during 3.5 seconds. Judge OK and clear the NG when the OK signal is sent.

6. DTC CLEAR CONDITION
- When the OK idling cycle was completed 40 times in a row
- When "Clear Memory" was performed

7. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle was completed 3 times in a row
- When "Clear Memory" was performed

8. FAIL SAFE
Tumble generator valve control: Not allowed to move tumble generator valve.
Basic advance angle
- Change the map for calculating to the map for malfunction of the tumble generator valve.
Electronic throttle control
- Change the angle operation of accelerator position sensor demand target throttle opening calculation to the map for malfunction of the tumble generator valve.

9. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)