Inspection

INSPECTION
1. HIGH CLUTCH AND REVERSE CLUTCH
Check the following items:
^ Drive plate facing for wear and damage
^ Driven plate for discoloration (burned color)
^ Snap ring for wear, return spring for setting and breakage, and snap ring retainer for deformation
^ Lip seal and D-ring for damage
^ Piston and drum check ball for operation
^ Adjust the total end play.

2. PLANETARY GEAR AND LOW CLUTCH
Check the following items:
^ Drive plate facing for wear and damage
^ Driven plate for discoloration (burned color)
^ Snap ring for wear, return spring for setting and breakage, and spring retainer for deformation
^ Lip seal and D-ring for damage
^ Piston check ball for operation
^ Measure the total end play and adjust it within specifications.

3. 2-4 BRAKE
Check the following items:
^ Drive plate facing for wear and damage
^ Driven plate for discoloration (burned color)
^ Snap ring for wear and spring retainer for deformation
^ Lip seal and D-ring for damage
^ Measure the total end play and adjust it within specifications.

4. ONE-WAY CLUTCH
^ Make sure the snap ring is not worn and the seal rings are not deformed.
^ Measure the total end play and adjust it within specifications.

5. LOW & REVERSE BRAKE
Check the following items:
^ Drive plate facing for wear and damage
^ Driven plate for discoloration (burned color)
^ Snap ring for wear and spring retainer for deformation