With Manufacturer's Scan Tool

CLEAR MEMORY MODE
1. On the [[Main Menu]] display screen, select the (2. Each System Check) and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the (Transmission Control System) and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the (Clear Memory) and press the [YES] key.
5. When the "Done" is shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE:
^ For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
^ When (Clear Memory 2) is selected and executed, DTC and learned control memory is cleared. If Clear Memory 2 is performed, execute the learning control.