Exhaust Temperature Sensor: Service and Repair
Exhaust Temperature SensorREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the joint pipe.
3. Apply spray type lubricant to the threaded portion of exhaust temperature sensor, and leave it for 1 minute or more.
4. Remove the exhaust temperature sensor.
CAUTION: When removing the exhaust temperature sensor, wait until the exhaust pipe cools, otherwise it will damage exhaust pipe.
INSTALLATION
1. Before installing the exhaust temperature sensor, apply anti-seize compound only to the threaded portion of exhaust temperature sensor to make the next removal easier.
CAUTION: Never apply anti-seize compound to the protector of exhaust temperature sensor.
Anti-seize compound: SS-30 JET LUBE
2. Install the exhaust temperature sensor.
NOTE: Align the harness (A) of exhaust temperature sensor to the marking (B) of joint pipe, and tighten the screws.
3. Install the joint pipe.
4. Connect the battery ground cable to battery.