With Manufacturer's Scan Tool

Read Diagnostic Trouble Code (DTC)

OPERATION




1. Turn ignition switch to OFF.
2. Perform the following job steps within 6 seconds.
3. Change the ignition switch from ON to OFF 3 times with pressing call answer/end button.
4. Turn ignition to ON at the 4th switching action.
5. When the call answer/end button is released, LED will blink to indicate DTC.

NOTE:
- Current DTC will be indicated by the red LED.
- Former DTC will be indicated by the green LED.
- Current DTC will be indicated first, and then former DTC will be indicated.
- DTC will be displayed in order of numerical sequence from smallest.
- DTC will be indicated in 2 times.