Air Intake Chamber (U5/Low Emissions)

Air Intake Chamber

REMOVAL

1. Loosen clamp (A) which connects air intake chamber and throttle body.
2. Loosen clamp (B) which connects air intake boot and air intake chamber.




3. Remove bolt (C) which secures air intake chamber to stay.
4. Disconnect blow-by hoses (2 places) and then, remove air intake chamber.

INSTALLATION
Install in the reverse order of removal.
Tightening torque: 6.5 N.m (0.66 kgf.m, 4.8 ft.lb)