Read Current Data

READ CURRENT DATA
1. On the Main Menu]] display screen, select the [Each System Check) and press the [YES] key.
2. On the System Selection Menu]] display screen, select the [Transmission Control System) and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the Transmission Diagnosis]] display screen, select the [Current Data Display & Save) and press the [YES] key.
5. On the Data Display Menu]] display screen, select the [Data Display) and press the [YES] key.
6. Using the scroll key, move the display screen up or down until desired data is shown.
^ A list of the support data is shown in the following table.





NOTE: For detailed operation procedure, refer to the Subaru Select Monitor OPERATION MANUAL.