display screen, select the [2. Each System Check) and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the [Transmission Control System) and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the [Clear Memory) and press the [YES] key.
5. When the "Done" and "Turn Ignition Switch OFF" are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE: For detailed operation procedure, refer to the Subaru Select Monitor OPERATION MANUAL.