Basic Diagnostic Procedure
Basic Diagnostic ProcedurePROCEDURE
WITHOUT SUBARU SELECT MONITOR
CAUTION: Remove foreign matter (dust, water, etc.) from the ABSCM&H/U connector during removal and installation.
Steps 1-4:
Step 5:
NOTE:
^ To check the harness for broken wires or short circuits, shake it while holding it or the connector.
^ When the ABS warning light illuminates, read and record the Diagnostic Trouble Code (DTC) indicated by BS warning light.
WITH SUBARU SELECT MONITOR
CAUTION: Remove foreign matter (dust, water, etc.) from the ABSCM&H/U connector during removal and installation.
Steps 1-3:
Step 4:
NOTE:
^ To check the harness for broken wires or short circuits, shake it while holding it or the connector.
^ Check list for interview.