Timing Cover: Service and Repair

REMOVAL
1. Remove the V-belt.
2. Remove the crankshaft pulley.
3. Remove the timing belt cover (LH) (A).
4. Remove the timing belt cover (RH) (B).





5. Remove the front timing belt cover (C).

INSTALLATION
1. Install the front timing belt cover (C).
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)
2. Install the timing belt cover (RH) (B).
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)





3. Install the timing belt cover (LH) (A).
4. Install the crankshaft pulley.
5. Install the V-belt.

INSPECTION
Make sure the cover is not damaged.