V-Belt

REMOVAL
FRONT SIDE BELT





1. Remove the V-belt cover.
2. Loosen the lock bolt (A).
3. Loosen the slider bolt (B).





4. Remove the front side belt (C).

REAR SIDE BELT
1. Loosen the lock nut (A).





2. Loosen the slider bolt (B).
3. Remove the A/C belt.





4. Remove the A/C belt tensioner.

INSTALLATION
FRONT SIDE BELT

CAUTION: Wipe off any oil or water on the belt and pulley.

1. Install the belt (C), and tighten the slider bolt so as to obtain the specified belt tension
2. Tighten the lock bolt (A).





3. Tighten the slider bolt (B).

REAR SIDE BELT
1. Install the belt, and tighten the slider bolt (B) so as to obtain the specified belt tension.





2. Tighten the lock nut (A).

INSPECTION
1. Replace the belts, if cracks, fraying or wear is found.








2. Check the drive belt tension and adjust it if necessary by changing generator installing position and/or idler pulley installing position.