Passenger Airbag Module

REMOVAL / Passenger Airbag Module
1. Turn ignition switch OFF.
2. Disconnect ground cable from battery, and wait for at least 20 seconds before starting work.
3. Remove glove box.
4. Detach airbag connector from support beam bracket, and then disconnect airbag connector.






5. Remove the seven bolts, and then carefully remove airbag module.
6. Refer to "CAUTION" for handling of a removed airbag module.

INSTALLATION
Install in the reverse order of removal.

CAUTION: Do not allow harness and connectors to interfere or get tangled up with other parts.