Camshaft Gear/Sprocket: Service and Repair

A: REMOVAL
1. Remove V-belt.
2. Remove crankshaft pulley.
3. Remove timing belt assembly.





4. Remove camshaft sprocket No. 1 and No. 2. To lock camshaft, use ST.
ST 499207100 CAMSHAFT SPROCKET WRENCH

B: INSTALLATION
1. Install camshaft sprocket No. 1 and No. 2. To lock camshaft, use ST.
ST 499207100 CAMSHAFT SPROCKET WRENCH
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)





CAUTION: Do not confuse left and right side camshaft sprockets during installation. The camshaft sprocket No. 2 is identified by a projection used to monitor camshaft position sensor.

2. Install timing belt assembly.
3. Install crankshaft pulley.
4. Install V-belt.