Rear Quarter Trim
REAR QUARTER TRIMREMOVAL
1. REAR QUARTER PILLAR UPPER TRIM PANEL (WAGON)
1. Set rear seat cushion up.
2. Remove rear seat backrest.
3. Remove rear quarter lower trim.
4. Remove rear rail trim.
5. Remove rear quarter upper front trim.
6. Remove rear quarter upper rear trim.
2. REAR QUARTER LOWER TRIM PANEL (WAGON)
1. Remove luggage cover.
2. Set rear seat cushion up.
3. Remove rear seat backrest.
4. Remove rear skirt trim.
5. Remove clip and screw then disconnect connector (RH side).
6. Remove rear seat belt lower anchor then remove rear quarter lower trim.
INSTALLATION
1. REAR QUARTER PILLAR UPPER TRIM PANEL (WAGON)
Install in the reverse order of removal.
CAUTION: Be sure to securely hook pawls of rear quarter pillar trim panel to body flange.
2. REAR QUARTER LOWER TRIM PANEL (WAGON)
Install in the reverse order of removal.
CAUTION: Be careful not to ride trim panel over harness, insulators, etc.