Rocker Arm Shaft
| Shaft diameter | 21.987 - 22.000 Millimeter (mm) | |
| Clearance between support and shaft | Standard | 0.005 - 0.039 Millimeter (mm) |
| Limit | 0.05 Millimeter (mm) | |
| Rocker shaft support inside diameter | 220.02 - 22.041 Millimeter (mm) | |
| Tightening torque | Shaft support to shaft | 5 +/- 1 Newton Meter (Nm) |
| Shaft to cylinder head | 25 +/- 2 Newton Meter (Nm) Temporarily tighten bolts (a) through (d) equally as shown in figure. Tighten bolts (e) through (h) to specified torque. Tighten bolts (a) through (d) to specified torque. |