7. Valve Lash Adjuster

7. VALVE LASH ADJUSTER





1) Check valve lash adjuster visually.
2) Measure outer diameter of valve lash adjuster.

Outer diameter:
29.959 - 29.975 mm (1.1795 - 1.1801 in)





3) Measure inner diameter of bush on cylinder head.

Inner diameter:
29.994 - 30.016 mm (1.1809 - 1.1817 in)

CAUTION: If difference between outer diameter of valve lash adjuster and Inner diameter of bush is over the limit, replace cylinder head.

Standard:
0.019 - 0.057 mm (0.0007 - 0.0022 in)

Limit:
0.100 mm (0.0039 in)