Except California

1. Release fuel pressure. Refer to fuel pressure release.
2. Open fuel flap lid, and remove fuel filler cap.




3. Disconnect battery ground cable.




4. Disconnect connector from mass air flow sensor.




5. Loosen clamp which connects air intake chamber to throttle body.




6. Remove two clips of air cleaner upper cover.




7. Remove bolts which install air intake chamber on stays.




8. Disconnect blow-by hose from air intake chamber.
9. Remove air intake duct, air cleaner upper cover and air intake chamber as a unit.
10. Remove air cleaner element.




11. Disconnect accelerator cable (A).
12. Disconnect cruise control cable (B). (With cruise control model)
13. Disconnect vacuum hoses from pressure sources switching solenoid valve.

14. Remove power steering pump from bracket.




1. Remove V-belt cover.




2. Loosen lock bolt and slider bolt, and remove power steering pump drive V-belt.




3. Remove bolts which secure power steering pipe brackets to intake manifold.

NOTE: Do not disconnect power steering hose.




4. Remove bolts which install power steering pump to bracket.




5. Place power steering pump on the right side wheel apron.




15. Remove fuel pipe protector.




16. Disconnect spark plug cords from ignition coil and ignitor assembly.




17. Disconnect PCV hose (A) and pressure regulator vacuum hose (B) from intake manifold.
18. Disconnect vacuum hose (C) to cruise control diaphragm. (With cruise control models)




19. Disconnect engine coolant hose from throttle body.




20. Disconnect brake booster hose.




21. Remove air intake chamber stay RH, engine harness bracket from transmission housing, and disconnect engine harness connectors from bulkhead harness connectors.




22. Disconnect connectors from engine coolant temperature sensor.




23. Disconnect knock sensor connector.




24. Disconnect connector from camshaft position sensor.




25. Disconnect connector from crankshaft position sensor




26. Disconnect connector from oil pressure switch.




27. Disconnect fuel hoses from fuel pipes.

WARNING: Catch fuel from hoses in a container.




28. Remove bolts which hold intake manifold onto cylinder heads.




29. Remove intake manifold.