Rear Door Window Glass: Adjustments

Alignment of rear door glass is basically the same as for the front door glass. Due to slight difference in adjustment dimensions for fore-aft, up-down, and in-out alignments, key points for rear door adjustment are described.




- Fore-aft adjustment
1. Door glass alignment must be adjusted so that glass-to-center pillar fit is equal at all points. Always use dimensions as a guide during adjustment.

NOTE: If dimensions are smaller than those indicated, glass will be caught in weatherstrip and may not raise to the fully closed position.

2. After making fore-aft adjustment, raise and lower glass to ensure it is free from any binding.




- Fit adjustment
Increasing contact pressure causes rear door glass to be caught in center pillar upper and lower weatherstrip; this will cause premature weatherstrip wear. For this reason, always use dimensions indicated in figure as a guide during glass fit adjustment.