Main Fan

A. REMOVAL AND INSTALLATION





1. Disconnect battery ground cable.
2. Lift-up the vehicle.





3. Remove under cover.





4. Disconnect connector of main fan motor.
5. Lower the vehicle.





6. Remove V-belt covers.





7. Disconnect overflow hose.





8. Remove reservoir tank.





9. Remove radiator main fan motor assembly.
10. Installation is in the reverse order of removal.

NOTE: When the main fan motor assembly cannot be installed as is, loosen the sub fan motor assembly securing bolts to install it.





Tightening torque: 4.9 ± 1.5 Nm (0.504 - 0.15 kg-m, 3.6 ± 1.1 ft. lbs.)





Tightening torque: 4.9 ± 1.5 Nm (0.50 ± 0.15 kg-m, 3.6 ± 1.1 ft. lbs.)


B: DISASSEMBLY AND ASSEMBLY





1. Remove clip which holds motor connector onto shroud.





2. Remove nut which holds fan itself onto fan motor and shroud assembly.





3. Remove bolts which install fan motor onto shroud.
4. Installation is in the reverse order of removal.





Tightening torque: 4.4 ± 0.5 Nm (0.45 ± 0.05 kg-m, 3.3 ± 0.4 ft. lbs.)





Tightening torque: 3.4 ± 0.5 Nm (0.35 ± 0.05 kg-m, 2.5 ± 0.4 ft. lbs.)