Rear Exhaust Pipe

REMOVAL





1) Separate rear exhaust pipe from center exhaust pipe.





2) Separate rear exhaust pipe from muffler.

CAUTION: Be careful not to pull down rear exhaust pipe.





3) Remove rear exhaust pipe bracket from rubber cushion.

NOTE: To facilitate removal, apply a coat of SUBARU CRC or equivalent to pipe bracket in advance.

SUBARU CRC (Part No. 004301003)

INSTALLATION

CAUTION: Replace gaskets with new ones.





1) Install rear exhaust pipe bracket to rubber cushion.

NOTE: To facilitate installation, apply a coat of SUBARU CRC or equivalent to mating area of rubber cushion in advance.

SUBARU CRC (Part No. 004301003)





2) Install rear exhaust pipe to muffler.

Tightening torque: 48 ± 5 Nm (4.9 ± 0.5 kg-m, 35.4 ± 3.6 ft. lbs.)





3) Install rear exhaust pipe to center exhaust pipe.

Tightening torque: 18 ±5 Nm (1.8 ±0.5 kg-m, 13.0 ± 3.6 ft. lbs.)