Removal

REMOVAL





1) Open engine hood.
2) Disconnect ground cable from the battery.





3) Drain engine coolant completely.





4) Disconnect radiator outlet hose from engine coolant pump.





5) Remove radiator fan motor assembly.





6) Remove V-belt(s).





7) Remove timing belt.





8) Remove bell tension adjuster.





9) Remove camshaft position sensor.





10) Remove left side camshaft pulley by using ST. ST 499207100 CAMSHAFT SPROCKET WRENCH





11) Remove left side rear timing belt cover.





12) Remove tensioner bracket.
13) Disconnect heater hose from engine coolant pump.
14) Remove engine coolant pump.