Restraint Systems

TROUBLE CODE 14





FLOWCHART

Possible Diagnosis:
- (AB2) and (AB7) are not connected properly.
- (AB3) and (AB8) are not connected properly.
- (AB4), (AB5) and (AB6) are not connected properly to airbag control module.

CAUTION: Before performing diagnostics on airbag system, turn ignition switch "OFF", disconnect battery ground cable, and then wait at least 20 seconds.

1. AIRBAG CONTROL MODULE DOUBLE LOCK INSPECTION [AT CONNECTORS (AB4) (AB5) (AB6)]





1) Check double lock of connectors (AB4) (AB5) (AB6) connected to airbag control module.

2. DOUBLE LOCK INSPECTION [FOR CONNECTORS (AB3) AND (AB8) AT HARNESS SPOOL]

1) Remove lower cover and panel.





2) Check double lock of connectors (AB3) and (AB8) at harness spool.

3. ROLL CONNECTOR DOUBLE LOCK INSPECTION [AT CONNECTORS (AB2) AND (AB7)]





1) Remove airbag module and check double lock at connectors (AB2) and (AB7) at roll connector.