Fuel Tank Removal and Installation

Fuel Tank:

1. Disconnect negative battery cable.
2. Remove rear seat back and cushion.

Fuel Filler Pipe Protector:

3. With inside trim removed, remove fill pipe cover.

Separator And Roll Over Valve:

4. Remove separator and roll over valve and remove hose from separator.
5. Remove access cover disconnect fuel sending unit electrical connector.

Filler Hose Removal:

6. Disconnect filler hose from fuel tank.
7. Disconnect air vent hose at filler pipe.
8. Raise vehicle on hoist.

Fuel Line Removal:

9. Disconnect and drain fuel through fuel delivery hose.
10. Remove two attaching bolts and remove parking brake cable.

Fuel Filter Removal:

11. Remove fuel filter and support bracket.
12. Disconnect fuel lines between filter and tank and between tank and return line.
13. Remove 6 tank attaching bolts.
14. Slide tank to the left side of the vehicle and remove.
15. Reverse procedure to install.