Fuel Filter: Service and Repair

REMOVAL

Fig. 21:

1. Remove 3 flange bolts and remove filter/pump bracket. See Fig. 21.
2. Disconnect fuel pump electrical connector.

Fig. 22:

3. Disconnect hoses from fittings A and B. Cap off hoses to prevent fuel spillage. See Fig. 22.

Fig. 24:

4. Disconnect hose at D. See Fig. 24.
5. Remove filter.


INSTALLATION

1. Insert filter into hose at D. See Fig. 24.

Fig. 25:

2. Turn ears of clip as shown. See Fig. 25.
3. Connect hoses at A and B. See Fig. 22.

Fig. 28:

4. Connect fuel pump electrical connector. Do not allow harness to sag under vehicle. See Fig. 28.

Fig. 29:

5. Fasten filter/pump bracket to body and torque fasteners.

TORQUE VALUE
5.3 - 5.6 ft.lbs (7.2 - 7.6 Nm)

Fig. 30:

Fig. 31:

6. Using Fig. 30 and Fig. 31, confirm hoses are connected and routed correctly.