Installation

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

(a) Install the check ball body and the compression spring.









(b) Check the accumulator pistons, check ball body and the compression spring shown in the illustration.

(c) Connect the manual valve connecting rod sub-assembly to the manual valve lever sub-assembly.

(d) Install the transmission valve body assembly with the 19 bolts.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

Bolt Length





(e) Install the detent spring and the detent spring cover with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. CONNECT TRANSMISSION WIRE Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL TRANSMISSION OIL CLEANER MAGNET Installation

5. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

6. INSTALL FRONT EXHAUST PIPE ASSEMBLY

Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

8. ADD AUTOMATIC TRANSMISSION FLUID LEVEL

Adjustment

9. INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL

10. RESET CHECK RESET MEMORY

Programming and Relearning

11. INSPECT EXHAUST GAS LEAK Installation