Reassembly

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY; 2013 MY FR-S [03/2012 -]

1. INSTALL FLOOR SHIFT CONNECTING ROD SWIVEL

(a) Install the 2 washers, grommet, pin and floor shift connecting rod swivel to the select lever with the clip.

2. INSTALL SHIFT LEVER SEAT SUB-ASSEMBLY

(a) Install the shift lever seat sub-assembly and the 4 spacer plates to the base plate.

3. INSTALL FLOOR SHIFT SUPPORT BRACKET

(a) Apply MP grease to the spring and pin.

(b) Install the spring and pin to the floor shift support bracket.

(c) Apply MP grease to the floor shift control shaft lever and floor shift support bracket.

(d) Install the floor shift support bracket to the floor shift control shaft lever.

4. INSTALL FLOOR SHIFT CONTROL SELECT LEVER

(a) Install the floor shift support bracket and floor shift control shaft lever to the base plate.

5. INSTALL FLOOR SHIFT CONTROL SHAFT LEVER

(a) Install the floor shift control shaft lever to the base plate.

(b) Using a pin punch (3 mm (0.118 in.)) and a hammer, install a new spring pin.

6. INSTALL SHIFT LEVER PLATE GROMMET

(a) Install the shift lever plate grommet to the base plate.

7. INSTALL DETENT ROD

(a) Install the bush detent lock.

(b) Install the cushion detent lock to the detent lock rod.

(c) Apply MP grease to the detent lock spring and detent lock rod.

(d) Install the detent lock rod and detent lock spring.

(e) Install the detent lock clamp.

8. INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY

(a) Apply MP grease to the pin.

(b) Install the shift lock release arm to the shift lock control unit assembly.

(c) Install the shift lock control unit assembly to the base plate.

9. INSTALL FLOOR SHIFT SHIFT LEVER HOUSING

(a) Engage the 2 claws and install the floor shift shift lever housing to the base plate.

(b) Install the new shift lever lock nut and shift lever lock pin.

(d) Lock the harness connector terminals.

(e) Engage the claw and install the connector.