Installation

FA20 ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL ACCELERATOR PEDAL ASSEMBLY

NOTICE:
* Avoid excessive force to the accelerator pedal assembly.
* Do not disassemble the accelerator pedal assembly.

(a) Install the accelerator pedal assembly with the 2 nuts.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect the accelerator pedal assembly connector.

2. INSTALL ACCELERATOR PEDAL ROD COVER

(a) Engage the new clip, and install the accelerator pedal rod cover.

3. INSTALL ACCELERATOR PEDAL ROD STOPPER

(a) Install the accelerator pedal rod stopper.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation