Read Current Data

READ CURRENT DATA
1. On the "Main Menu" display screen, select the (Each System Check) and press the [YES] key.
2. On the "System Selection Menu" display screen, select the (Transmission Control System) and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the "Transmission Diagnosis" display screen, select the (Current Data Display & Save) and press the [YES] key.
5. On the "Transmission Diagnosis" display screen, select the (Data Display) and press the [YES] key.
6. Using the scroll key, move the display screen up or down until desired data is shown.
^ A list of the support data is shown in the following table.





NOTE:
For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION.