Muffler: Service and Repair

Muffler

Removal
1. Separate the muffler from rear exhaust pipe.

CAUTION: Be careful, the exhaust pipe is hot.





2. Apply a coat of spray type lubricant to the mating area of cushion rubbers in advance.





3. Remove the front, right and left cushion rubber, and detach the muffler assembly.

Installation
1. Install in the reverse order of removal.

NOTE: Replace the gasket and self-locking nuts with new ones.

^ Tightening torque 48 Nm (4.9 kgf-m, 35.4 ft. lbs.)





Inspection
1. Make sure there are no exhaust leaks from connections and welds.
2. Make sure there are no holes or rusting.
3. Make sure the cushion rubber is not worn or cracked.