Restraint System
DTC 24 IG1 OPENDTC DETECTING CONDITION:
^ Airbag control module is faulty.
^ Airbag main harness circuit is open.
^ Fuse No. 11 (in joint box) is blown.
^ Body harness circuit is open.
CAUTION:
^ Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the ground cable from battery, and wait more than 20 seconds before starting to work.
^ Before replacing the airbag module, seat belt pretensioner, roll connector, control module and sensor, reconnect each part and confirm that the warning light operates properly.
^ When inspecting the airbag main harness, disconnect the diver s airbag module passenger's airbag module connectors for safety reasons.
Wiring Diagram:
Step 1 - 4:
