Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Restraint System

DTC 11 DRIVER'S AIRBAG FAILURE

DTC DETECTING CONDITION:
^ Airbag main harness circuit is open, shorted or shorted to ground.
^ Airbag module harness (Driver) circuit is open, shorted or shorted to ground.
^ Roll connector circuit is open, shorted or shorted to ground.
^ Driver's airbag module is faulty.
^ Airbag control module is faulty.

CAUTION:
^ Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the ground terminal from battery, and wait more than 20 seconds before starting to work.
^ Before replacing the airbag module, seat belt pretensioner, roll connector, control module and sensor, reconnect each part and confirm that the warning light operates properly.
^ When inspecting the airbag main harness, disconnect the driver's airbag module and passenger's

NOTE: Prior to diagnosis, prepare two airbag resistors (98299PA040).

Wiring Diagram:





Step 1 - 4:




Step 5 - 7: