Transmission Support Replacement

Transmission Support Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Support the transmission with a transmission jack.




3. Remove the transmission mount to the transmission support retaining nuts.




4. Remove the lower transmission support to the frame mounting bolts.




5. Remove the upper transmission support to the frame mounting bolts (1, 2).
6. Remove the transmission support from the frame.

Installation Procedure




1. Install the transmission support to the frame.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the upper transmission support to the frame mounting bolts (1, 2).

Tighten the upper transmission support to the frame mounting bolts to 80 Nm (59 ft. lbs.).




3. Install the lower transmission support to the frame mounting bolts.

Tighten the bolts to 50 Nm (37 ft. lbs.).

4. Lower the transmission onto the transmission support.




5. Install the transmission mount to the transmission support retaining nuts.

Tighten the transmission mount to the transmission support retaining nuts to 46 Nm (35 ft. lbs.).

6. Lower the vehicle.