Check the Wiring Harness Between the Control Module and Airbag

Check The Wiring Harness Between The Control Module And Airbag
Unplug the connector:
Contact roller, steering wheel 336a







- Check the orange 3-pin connector on the wiring harness for an open circuit/pin slide-out and rectify it if necessary.
Plug in the connector.
Contact roller, steering wheel 336a







Unplug the connector:
Breakout box. BOB







- Check pins 1 and 2 of the control module's 45-pin connector for an open circuit/pin slide-out and rectify them if necessary.

Plug in the connector.
Breakout box. BOB







Take a resistance reading between

- 1 Control module, Airbag
- 2 Control module, Airbag







The reading should be 3 - 5 Ohm

Is the function correct?

NO - Rectifying the Lead

YES - Changing Components - II