ECM Power Supply and Gnd, Anti-Theft Alarm With VSS

Electronic control module power supply
- The +30 power supply goes via fuse 19 to pin 25 of the control module.
- The +30 power supply for the direction indicators goes via fuse 22 to pin 22 of the electronic control module.
- The +B power supply goes to pin 9 of the electronic control module.
- The +15 power supply goes direct from distribution terminal 159 to pin 10 of the control module. There is no fuse in this circuit.

Electronic control module ground
Electronic control module main ground (pin 13) is connected to grounding point G6.