Manual Control With Car Key

The theft alarm can be manually armed/disarmed with the car key in the front door locks. This function can be programmed out for markets that demand this.

Arming the theft alarm
1 When arming using the car key, this is inserted into the lock in the door and turned 45 degrees to the locked position.
2 A microswitch beside the door's lock cylinder sends a locking signal to the central locking system control module and a signal to the alarm control module (pin 17) to arm the alarm. The car doors are locked.

Disarming the theft alarm
1 When disarming using the car key, this is inserted into the door lock and turned 45 degrees to the unlocked position.
2 The microswitch by the door lock cylinder sends an unlock signal to the central locking system control module and a signal to the alarm control module (pin 6) to disarm the alarm. The car doors are unlocked.

Disarming the tailgate
1 It is possible to independently disarm and unlock the tailgate using the car key after special programming. The other alarm functions are not affected. Flash/sound confirmation for this function is programmable.
2 The microswitch in the luggage compartment lock supplies voltage to the luggage compartment lock motor so that this unlocks the tailgate, and sends a signal to the alarm control module (pin 15) to disarm the alarm.